 |
 |
|
|
|
|
 |
“Testing complex, user-driven functionality in irrigation controller
models”
Using NI
LabVIEW software and NI PXI, motion, and vision hardware to design and
build functional automated test equipment (ATE) that is complex enough
to emulate human behavior for accurate test results.
Click the
following link for more details:
NI Success Stories
|
 |
ScanWorks® delivers test coverage ICT can't
A motherboard
with five daughtercards just wasn’t getting the test coverage that the
manufacturer wanted from its in-circuit test (ICT) systems. As a result,
Testing House Mexico, a member of ASSET®’s network of Partner Providers,
was called in and eventually deployed a boundary scan test solution
integrated into the manufacturer’s ICT systems. The solution involved
the ScanWorks platform for embedded instruments.
Click the
following link for more details:
Success Stories ASSET + Agilent
|
|
|
Detecting the output differential pair for a boundary scan device which covers 1149.6 on GenRad test system
Testing
House, Inc. has successfully detected the output differential pair for a
boundary scan device which covers 1149.6 on our GenRad tester. The method used
does not require any hardware or loop back structure which requires fixture
modifications. We can detect at device pin or across the capicitor (assuming
there is not access on one side of the capicitor). Our test will even detect
if the cap is short or open. We capture a sample of the AC waveform
between P and N pins of each pair during boundary scan and then compare
the MIN, MAX, and Average against the expected values.
Please contact
Testing House for more information.
|
|
 |
Testing House Adds Seica Flying-Probe Test
Testing
House, Inc. has announced the installation of a Seica Pilot VIP/LX
flying-probe test system in its Fremont, California facility. Byoung An, CEO,
indicated that this equipment will enable Testing House to offer flying-probe
test services and programming services to customers.
Seica's North America
General Manager, Dave Sigillo, expressed his company's commitment to supporting
independent test and programming companies throughout the U.S., Canada and
Mexico.
Click on the following
link for more details:
Testing House Adds Seica Flying-Probe Test
|
|
|
Testing House Mexico Is A National Instrument Certified Alliance Partner
“After 4
years of work National Instruments has tribute our partnership and
recognized Testing House Mexico as a Certified Alliance Partner.
The National
Instruments Alliance Partner program is a worldwide network of more than 600
consultants, system integrators, developers, channel partners, and industry
experts who partner with NI to provide complete, high-quality virtual
instrumentation solutions to customers.
Whether you are
looking for assistance in completing a small integration project, require
in-depth expertise in building a large multifaceted system or solution, or
want to find a turnkey solution, National Instruments Alliance Partner
certified that Testing House Mexico has the resources and know-how to provide
for our customer's needs, expectations and more.”
Click on the following
link for more details:
National Instruments Certified Alliance
Partner
|
|
 |
CORELIS, Inc. and Testing House, Inc. Announcement
Testing House is
pleased to announce that we have joined the Corelis
Value Added Partner (VAP) program.
The Corelis VAP program has been
created to provide Corelis' customers with qualified boundary-scan test service providers
for Corelis ScanExpress boundary-scan test systems.
Testing House is honored to be
a member of this program and looks forward to providing this service to Corelis and
its customers.
|
|
|
ASSET InterTech and Testing House Mexico Partnership
ASSET and Testing House Mexico
announce an agreement on a country partnership encompassing a broad range of initiatives
including a test development and training center in Mexico, Sales and Technical local support
for ASSET products and training classes for development and diagnostics purposes. The
combined efforts will also be focused on supporting Mexican OEM’s and ODM’s who will be
deploying boundary scan and new JTAG-related technologies, such as IEEE P1149.7
(two-wire JTAG), IEEE P1687 (Internal JTAG), and Processor-Controlled Test, among others.
“This partnership
brings together two world class companies with complementary resources, a
shared commitment to excellence, willingness to take every step required to
produce a satisfied customer, continue to innovate the testing methods and
deliver the best test technology and applications to the electronic industry.”
-
Francisco Vázquez, Managing Director of Testing House Mexico
Business Unit
- Allen Harrison, Southern Region Sales
Manager for ASSET
|
|
 |
An
In-Circuit Test Channel Partner Interview Series with Agilent Technologies.
This article is the fourth in the Agilent Technologies series on programming house
partnerships. For this article, Agilent’s Americas Development Manager associated
with the ICT products, Stacy Johnson sat down with William Bischoff. William is
the Test Engineering Manager for TestingHouse, Inc.
The following link contains the full interview.
An In-Circuit
Test Channel Interview Series
|
|
|
|
Testing
House continues the CLD certification process of the
Engineering Team as LabVIEW Developers.
Rodolfo Renteria has earned NI certifications for CLAD and CLD and demonstrates a foundational proficiency
in the use of NI products and technologies for test and measurement applications.
Achieving this step guarantees to our customers that we will always be up to date
with certified Engineers in charge of Test Development.
|
|
|
|
Testing House Mexico Certified
as National Instruments LabVIEW Developer. Jorge Robles
has earned NI certifications for CLAD and CLD and
demonstrates a foundational
proficiency in the use of NI products and technologies for test and measurement
applications. Testing House Mexico is currently developing Functional Test Applications for the
Consumer Product,
Automotive and Security industries based on PXI, PCI and GPIB technology using LabView
and partnering with National Instruments in the effort to be leaders in the production
of satisfied customers!.
|
|
|
|
Asian Expansion
- For
better service and support for their worldwide customers, Testing House has expanded
in Asia opening three new offices.
-
China - Shenzhen
-
Malaysia - Penang
- Singapore - JB
|
|
|
|
NORTH READING, Mass.--(BUSINESS WIRE)--Teradyne, Inc., (NYSE:TER), the
industry’s leading manufacturer of in-circuit test (ICT)
systems, today announced an agreement with Testing House Inc., to support new
business activity in the west and southwest regions of North America. Testing
House, based in Fremont, CA, will provide Teradyne customers with technology and
applications support for Teradyne® TestStation™ hardware and
software products.
Robert Muller, general manager of Teradyne’s
Commercial Assembly Test Business Unit, said, “We
believe that this agreement will help strengthen Teradyne’s position in a key business region of North America. Testing
House will help support TestStation customers in this region and maintain a
top-of-the-line UltraPin II machine for application development, product
demonstrations and advanced technology seminars.”
Byoung An, president of Testing House said, "Having the latest low voltage
and SafeTest™ technologies from Teradyne and the ability
to provide high pin-count solutions up to 7,680 pins, gives us a unique
advantage in the industry. We intend to offer our customers test solutions that
concentrate on PCB diagnostics and allow them to improve their manufacturing
process in an efficient and confident way, with the best relationship between
cost and benefit. Our goal is to exceed our customers' expectations."
About Teradyne
Teradyne (NYSE:TER) is a leading supplier of Automatic Test
Equipment used to test complex electronics for the consumer electronics, automotive, computing,
telecommunications, and aerospace and defense industries. In 2006, Teradyne had
sales of $1.38 billion, and currently employs about 3,800 people worldwide. For
more information, visit www.teradyne.com. Teradyne® is a
registered trademark of Teradyne, Inc. in the U.S. and other countries. All
product names are trademarks of Teradyne, Inc. (including its subsidiaries) or
their respective owners.
About Testing House
Testing House was founded in 1992 by company President Byoung
An and is headquartered in Fremont, California. Since then, Testing House has grown to
become a global player in the PCB test and diagnostics market with facilities
located around the world. For more information, contact: Byoung An - President,
Testing House, Inc., Phone: 510-580-3070, Email:
Byoung@testinghouse.com
|
|
|
|
Testing House, developer and manufacturer of
innovative testing the X-TAL & Oscillator solutions has announced the XTALOSpro to
customer in this year.
We strongly request to use the XTALOSpro product for measuring
X-TAL & Oscillor devices.
TH product will be provide the power full technology and
feel the difference. (refer to technical support menu of website)
|
|
|
|
GÖPEL electronic, developer and manufacturer of innovative extended
JTAG/Boundary Scan test solutions has entered into an extensive strategic
partnership with Testing House Korea.
Within the scope of this agreement,
Testing House Korea located in Seoul, Korea has become GÖPEL electronic’s 13th
‘Center of Expertise’ (COE) worldwide. This includes membership in the “GÖPEL
electronic Alliance Partner Network”, in which some hundred specialists are
involved to ensure the worldwide customer support for JTAG/Boundary Scan
applications.
(THK's website: www.testinghouse.co.kr)
|
|
|
|
New!!!
X-TALOSpro
Now,
Testing House has announced new measurement product
for measuring X-TAL Frequency.
We called the X-TALOSpro
X-TALOSpro
is covered wide frequnecy range with 1Khz ~ 100Mhz.
Also,
New proouct has 3Channel inputs and provide
1 of 4 dividing circuit each channel from input frequency.
New X-TALOSpro is very high reliability
and performace product for ATE users.
If want to know more specification and information,
please send E-mail to us
|
|
 |
